Extended Service Valve to Accommodate Press Fittings
High & Low Pressure Switches
Outdoor Temp Sensor Factory Installed
Factory Charged w/ R410A Refrigerant
Long Line Set Capability (refer to spec sheet for details)
Low Ambient Cooling Capable w/ Optional Kit
Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
Corner Posts for Added Cabinet Strength
Coated Hail Guard Coil Protection
Post Painted (black) Coil
Coated Cabinet Screws
Internal Pressure Relief Valve & Thermal Overload
Gas Furnace
Two stage operation
Constant CFM (variable speed ) blower
Dehumification feature in cooling
Supports single & two-stage cooling units
Two-speed induced draft combusion blower
Fully insulated steel cabinet
Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed
RPJ aluminized steel primary heat exchanger
Stainless steel secondary heat exchanger
Direct ignition with Silicon Nitride ignitor
Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
35" (889mm) high, for ease of installation
Four position - upflow/downflow/horizontal (left/right) installation
At least twelve different venting configurations
Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)